Vasya Diagnost 12.10.1 (VAG COM 12.10 Rus) Setup [BETTER] Free

How to Download and Install Vasya Diagnost 12.10.1 (VAG COM 12.10 Rus) for Free

If you are looking for a reliable and easy-to-use diagnostic software for your VW, Audi, Seat or Skoda car, you might be interested in Vasya Diagnost 12.10.1 (VAG COM 12.10 Rus). This software allows you to perform various diagnostic functions, such as reading and clearing fault codes, coding and adaptation, measuring values, output tests and more.

Vasya Diagnost 12.10.1 (VAG COM 12.10 Rus) is compatible with any car from the VW-Audi Group that was produced from 1990 to 2015. You don't need any additional adapters if your car has a 16-pin OBD-II connector. You can also use this software with older cars that have a 2x2 connector, but you will need a special cable for that.

In this article, we will show you how to download and install Vasya Diagnost 12.10.1 (VAG COM 12.10 Rus) for free on your Windows PC. You will also need a USB interface cable that connects your PC to your car's OBD-II port. You can buy this cable online or from a local dealer.

Step 1: Download Vasya Diagnost 12.10.1 (VAG COM 12.10 Rus)

The first step is to download the software from the official website of Vasya Diagnost[^2^]. You can choose between a 32-bit or a 64-bit version, depending on your operating system. The file size is about 300 MB and it is compressed in a ZIP archive.

Once you have downloaded the file, you need to extract it to a folder on your PC. You can use any program that can handle ZIP files, such as WinRAR or 7-Zip. Make sure you remember the location of the extracted folder, as you will need it later.

Step 2: Install Vasya Diagnost 12.10.1 (VAG COM 12.10 Rus)

The next step is to install the software on your PC. To do this, you need to run the setup.exe file that is located in the extracted folder. You will see a welcome screen that asks you to choose a language for the installation process.

After that, you will see a license agreement that you need to accept before proceeding. Then, you will see a screen that asks you to choose a destination folder for the installation. You can leave it as default or change it if you want.

Next, you will see a screen that asks you to choose a start menu folder for the program shortcuts. You can also leave it as default or change it if you want.

Finally, you will see a screen that shows you the installation progress. Wait until it is finished and then click Finish to exit the setup.

Step 3: Connect Your Car and Run Vasya Diagnost 12.10.1 (VAG COM 12.10 Rus)

The last step is to connect your car to your PC and run the software. To do this, you need to plug one end of the USB interface cable into your PC's USB port and the other end into your car's OBD-II port.

The OBD-II port is usually located under the dashboard on the driver's side of the car, but it may vary depending on the model and year of your car. You can check your owner's manual or search online for the exact location of your OBD-II port.

Once you have connected the cable, you need to turn on the ignition of your car, but do not start the engine.

Then, you need to run the Vasya Diagnost.exe file that is located in the installation folder of the software. You will see a main window that shows you various options and functions.

You can choose between Auto Scan, Control Module Finder or Manual Selection modes to access different diagnostic features of your car.

You can also adjust some settings, such as language, units, interface type and more by clicking on Options.

To start a474f39169